Wood Screws
Sort by:
Würth ASSY 4 5 x 40 mm wood screws for fixing screw-on holds, feet and volumes to plywood climbing walls. Torx T20 drive for a clean, cam-out-free set.
- Diameter 5 mm, length 40 mm
- Torx T20 drive
- Countersunk head, sits flush in the hold
- Zinc-plated steel
- CE marked, ETA approved
- Box of 500 screws
Use a T20 bit: the wrong size slips and chews the head. Our T20 bits and magnetic bit holder are in Tools. For bolt-on holds, see M10 Bolts.
Würth ASSY 4 5 x 50 mm wood screws for fixing screw-on holds, feet and volumes to plywood climbing walls. Torx T20 drive for a clean, cam-out-free set.
- Diameter 5 mm, length 50 mm
- Torx T20 drive
- Countersunk head, sits flush in the hold
- Zinc-plated steel
- CE marked, ETA approved
- Box of 250 screws
Use a T20 bit: the wrong size slips and chews the head. Our T20 bits and magnetic bit holder are in Tools. For bolt-on holds, see M10 Bolts.
Würth ASSY 4 5 x 70 mm wood screws for fixing screw-on holds, feet and volumes to plywood climbing walls. Torx T20 drive for a clean, cam-out-free set.
- Diameter 5 mm, length 70 mm
- Torx T20 drive
- Countersunk head, sits flush in the hold
- Zinc-plated steel
- CE marked, ETA approved
- Box of 200 screws
Use a T20 bit: the wrong size slips and chews the head. Our T20 bits and magnetic bit holder are in Tools. For bolt-on holds, see M10 Bolts.
Würth ASSY 4 5 x 90 mm wood screws for fixing screw-on holds, feet and volumes to plywood climbing walls. Torx T20 drive for a clean, cam-out-free set.
- Diameter 5 mm, length 90 mm
- Torx T20 drive
- Countersunk head, sits flush in the hold
- Zinc-plated steel
- CE marked, ETA approved
- Box of 100 screws
Use a T20 bit: the wrong size slips and chews the head. Our T20 bits and magnetic bit holder are in Tools. For bolt-on holds, see M10 Bolts.
Würth ASSY 4 5 x 120 mm wood screws for fixing screw-on holds, feet and volumes to plywood climbing walls. Torx T20 drive for a clean, cam-out-free set.
- Diameter 5 mm, length 120 mm
- Torx T20 drive
- Countersunk head, sits flush in the hold
- Zinc-plated steel
- CE marked, ETA approved
- Box of 100 screws
Use a T20 bit: the wrong size slips and chews the head. Our T20 bits and magnetic bit holder are in Tools. For bolt-on holds, see M10 Bolts.
Klimas 5 x 40 mm wood screws for fixing screw-on holds, feet and volumes to plywood climbing walls. Torx T25 drive for a clean, cam-out-free set.
- Diameter 5 mm, length 40 mm
- Torx T25 drive
- Countersunk head, sits flush in the hold
- Zinc-plated steel
- Box of 500 screws
Use a T25 bit: the wrong size slips and chews the head. Our T25 bits and magnetic bit holder are in Tools. For bolt-on holds, see M10 Bolts.
Klimas 5 x 50 mm wood screws for fixing screw-on holds, feet and volumes to plywood climbing walls. Torx T25 drive for a clean, cam-out-free set.
- Diameter 5 mm, length 50 mm
- Torx T25 drive
- Countersunk head, sits flush in the hold
- Zinc-plated steel
- Box of 300 screws
Use a T25 bit: the wrong size slips and chews the head. Our T25 bits and magnetic bit holder are in Tools. For bolt-on holds, see M10 Bolts.
Klimas 5 x 70 mm wood screws for fixing screw-on holds, feet and volumes to plywood climbing walls. Torx T25 drive for a clean, cam-out-free set.
- Diameter 5 mm, length 70 mm
- Torx T25 drive
- Countersunk head, sits flush in the hold
- Zinc-plated steel
- Box of 200 screws
Use a T25 bit: the wrong size slips and chews the head. Our T25 bits and magnetic bit holder are in Tools. For bolt-on holds, see M10 Bolts.
Klimas 5 x 90 mm wood screws for fixing screw-on holds, feet and volumes to plywood climbing walls. Torx T25 drive for a clean, cam-out-free set.
- Diameter 5 mm, length 90 mm
- Torx T25 drive
- Countersunk head, sits flush in the hold
- Zinc-plated steel
- Box of 200 screws
Use a T25 bit: the wrong size slips and chews the head. Our T25 bits and magnetic bit holder are in Tools. For bolt-on holds, see M10 Bolts.
Klimas 5 x 120 mm wood screws for fixing screw-on holds, feet and volumes to plywood climbing walls. Torx T25 drive for a clean, cam-out-free set.
- Diameter 5 mm, length 120 mm
- Torx T25 drive
- Countersunk head, sits flush in the hold
- Zinc-plated steel
- Box of 200 screws
Use a T25 bit: the wrong size slips and chews the head. Our T25 bits and magnetic bit holder are in Tools. For bolt-on holds, see M10 Bolts.
Example product
30,00 €
Example product
30,00 €
Example product
30,00 €
Example product
30,00 €
SHAPER QUALITY. WAREHOUSE PRICING.