M10 Bolts

Würth M10 x 40 mm socket head cap screws for fixing climbing holds into M10 T-nuts. The standard bolt on every climbing wall, from commercial gyms to home walls.

• Thread: M10, length 40 mm
• Standard: ISO 4762 (formerly DIN 912)
• Strength class: 8.8
• Steel, blue zinc plated
• Drive: 8 mm hex socket

Choosing the length: the bolt goes through the hold and must engage the full depth of the T-nut. Too short, it won't hold. Tighten with our 8 mm T-handle hex key, in Tools.

Würth M10 x 50 mm socket head cap screws for fixing climbing holds into M10 T-nuts. The standard bolt on every climbing wall, from commercial gyms to home walls.

• Thread: M10, length 50 mm
• Standard: ISO 4762 (formerly DIN 912)
• Strength class: 8.8
• Steel, blue zinc plated
• Drive: 8 mm hex socket

Choosing the length: the bolt goes through the hold and must engage the full depth of the T-nut. Too short, it won't hold. Tighten with our 8 mm T-handle hex key, in Tools.

Würth M10 x 60 mm socket head cap screws for fixing climbing holds into M10 T-nuts. The standard bolt on every climbing wall, from commercial gyms to home walls.

• Thread: M10, length 60 mm
• Standard: ISO 4762 (formerly DIN 912)
• Strength class: 8.8
• Steel, blue zinc plated
• Drive: 8 mm hex socket

Choosing the length: the bolt goes through the hold and must engage the full depth of the T-nut. Too short, it won't hold. Tighten with our 8 mm T-handle hex key, in Tools.

Würth M10 x 70 mm socket head cap screws for fixing climbing holds into M10 T-nuts. The standard bolt on every climbing wall, from commercial gyms to home walls.

• Thread: M10, length 70 mm
• Standard: ISO 4762 (formerly DIN 912)
• Strength class: 8.8
• Steel, blue zinc plated
• Drive: 8 mm hex socket

Choosing the length: the bolt goes through the hold and must engage the full depth of the T-nut. Too short, it won't hold. Tighten with our 8 mm T-handle hex key, in Tools.

Würth M10 x 80 mm socket head cap screws for fixing climbing holds into M10 T-nuts. The standard bolt on every climbing wall, from commercial gyms to home walls.

• Thread: M10, length 80 mm
• Standard: ISO 4762 (formerly DIN 912)
• Strength class: 8.8
• Steel, blue zinc plated
• Drive: 8 mm hex socket

Choosing the length: the bolt goes through the hold and must engage the full depth of the T-nut. Too short, it won't hold. Tighten with our 8 mm T-handle hex key, in Tools.

Würth M10 x 90 mm socket head cap screws for fixing climbing holds into M10 T-nuts. The standard bolt on every climbing wall, from commercial gyms to home walls.

• Thread: M10, length 90 mm
• Standard: ISO 4762 (formerly DIN 912)
• Strength class: 8.8
• Steel, blue zinc plated
• Drive: 8 mm hex socket

Choosing the length: the bolt goes through the hold and must engage the full depth of the T-nut. Too short, it won't hold. Tighten with our 8 mm T-handle hex key, in Tools.

Würth M10 x 100 mm socket head cap screws for fixing climbing holds into M10 T-nuts. The standard bolt on every climbing wall, from commercial gyms to home walls.

• Thread: M10, length 100 mm
• Standard: ISO 4762 (formerly DIN 912)
• Strength class: 8.8
• Steel, blue zinc plated
• Drive: 8 mm hex socket

Choosing the length: the bolt goes through the hold and must engage the full depth of the T-nut. Too short, it won't hold. Tighten with our 8 mm T-handle hex key, in Tools.

Würth M10 x 120 mm socket head cap screws for fixing climbing holds into M10 T-nuts. The standard bolt on every climbing wall, from commercial gyms to home walls.

• Thread: M10, length 120 mm
• Standard: ISO 4762 (formerly DIN 912)
• Strength class: 8.8
• Steel, blue zinc plated
• Drive: 8 mm hex socket

Choosing the length: the bolt goes through the hold and must engage the full depth of the T-nut. Too short, it won't hold. Tighten with our 8 mm T-handle hex key, in Tools.