MULTI-BRAND
M10 bolt - 40mm
3,00 €
Unit price perWürth M10 x 40 mm socket head cap screws for fixing climbing holds into M10 T-nuts. The standard bolt on every climbing wall, from commercial gyms to home walls.
- Thread: M10, length 40 mm
- Standard: ISO 4762 (formerly DIN 912)
- Strength class: 8.8
- Steel, blue zinc plated
- Drive: 8 mm hex socket
Choosing the length: the bolt goes through the hold and must engage the full depth of the T-nut. Too short, it won't hold. Tighten with our 8 mm T-handle hex key, in Tools.
M10 bolt - 40mm
3,00 €
Unit price per500 in stock
Würth M10 x 40 mm socket head cap screws for fixing climbing holds into M10 T-nuts. The standard bolt on every climbing wall, from commercial gyms to home walls.
- Thread: M10, length 40 mm
- Standard: ISO 4762 (formerly DIN 912)
- Strength class: 8.8
- Steel, blue zinc plated
- Drive: 8 mm hex socket
Choosing the length: the bolt goes through the hold and must engage the full depth of the T-nut. Too short, it won't hold. Tighten with our 8 mm T-handle hex key, in Tools.
Grip:
Material: Zinc-plated steel
Size:
Weight:
Number of holds:
- Brush regularly to remove chalk and rubber residue
- For a deeper clean, wash with lukewarm water and diluted white vinegar
- Avoid acid or harsh products, which can dull the colour of climbing holds and damage the grain over the long term
- Let dry completely before bolting back on
- Check the product's condition (cracks, chips, wear) and replace if necessary
SHAPER QUALITY. WAREHOUSE PRICING.